+
  • RC加电阻电容.png

RC circuit with resistor and capacitor

  • Voltage (AC): 275/300/310Vac
  • Capacity (uF): 0.001μF~25μF
  • Diameter (mm): 6mm~35mm
  • Width (mm): 13mm~57mm
  • Height (mm): 12mm~50mm
  • Foot distance (mm): 10mm~52.5mm
  • Maximum temperature (° C): 110℃
  • Minimum temperature (° C): -40℃

Features: X2 capacitor and discharge resistor are connected in parallel internally. Excellent flame retardant performance. Widely used in anti-interference occasions such as power cross-lines. This RC capacitor is widely used in: ● Audio filtering, forming low-pass, high-pass, band-pass, and band-stop filters ● Forming a Wien bridge, used in measuring instruments or as a low-frequency oscillator ● High-voltage AC to low-voltage DC without a transformer ● Forming a twin-T network, used to form a band-pass filter or selective amplifier ● Acting as a signal load and DC blocking in AC amplifiers etc. RC circuits.

Key words:

capacitor


Product Description

RC resistor-capacitor

What is an RC capacitor? A capacitor that is charged through a resistor R by a power supply Vu is called an RC capacitor. It is also known as an RC filter constructed from a resistor and a capacitor. There are low-pass and high-pass filters. The cutoff frequency of an RC filter is calculated using the formula: F(cutoff) = 1 / (2πRC). The cutoff frequency is the frequency at which the filter's frequency response shows an inflection point. This capacitor is made from polypropylene film, rolled and processed until the gold spraying process on both sides of the capacitor is complete. Then, it is combined with resistors and capacitors of different resistance values to create the final product, with both series and parallel structures available.

Prev

Next

Message

Professional service team answers